These Hydraulic brake calipers are made of high quality Galvanised Steel for corrosion resistance making them ideal for marine trailers. Designed to be a replacement for a CH100G Calliper. Hydraulic brake systems are most common on boat Trailers that are rated above 2000Kg due to their ability to keep working when exposed to water. When your trailer is rated above 2000Kg in a dual Axle setup you will need to have hydraulic brakes installed on both Axles. Hydraulic Calipers are often preferred when using a dual axle system due to the simplicity connecting multiple calipers with hydraulic brake lines.
Trailers with loaded weights exceeding 2000kg require independent control and breakaway facility, causing the brakes to automatically be activated should the towing vehicle and the trailer become disconnected in transit.

Please Note:
This caliper has no thread in its mounting holes
This Caliper is slightly different from the CH100G as its Mounting Holes are placed at a different height.
Outside of Disc to Centre of mounting hole distance 71mm

Specifications
From top centre of brake pad material (top of disc) to the Centre of the mounting Holes 73mm
Stainless Steel Piston
To suit 10" Inch or 12" Inch x 15mm Thick brake discs
Suits 1/2'' Inch Rotors
Suits 3/8" UNF Brake Line fitting
Brake Pads Included
Sleeves and mounting bolts included
Piston Housing Can be unbolted and Flipped to make it a Right or Left Caliper
Mounting bolt distance (Centre to Centre) - 89mm

PLEASE NOTE
To ensure your brake line will seat properly you may require a Hydraulic Union HU4 with a Copper Washer CW1